230 V~, 50/60 Hz
230 V incandescent and halogen lamps 1000 W
Electronic transformers 750 W
Conventional transformers 750 VA
Fluorescent lamps -
Duo circuit KVG 1000 W
uncompensated 500 VA
parallel compensated 400 VA
Switching current (ohmic) max. 10 A
Making current < 4 s max. 35 A per min.
Recommended installation height approx. 2,5 m
Detection field on floor approx. diameter 8 m
Detection field at desk height approx. diameter 5 m
Detection angle 360 °
Detection levels 6
Sectors 80
Switching segments 320
Response brightness adjustable approx. 10 - 1000 Lux
Delay time adjustable approx. 10 - 30 min.
Operating temperature 5 - 35 °C
Dimensions (diameter x assembling height) 103 x 57,5 mm

For electronic ballasts and energy-saving lamps with excessive switch-on currents use making current limiters order no. 0185.

The purpose of the presence detector is to save energy by switching off lighting when unoccupied or when ambient light level is sufficient.Application areas e.g. office buildings, schools, hotels and nursing homes.
Energy saving by means of presence and brightness-dependent ON and OFF switching of lighting
with communication between individual units connected in parallel (controller system formation)
on push-button (NO), extension units can be switched on and off by retriggering
with red diagnosis and settings help LED
for ceiling assembly (also on a 60 wall box)
with push-on cover to limit the detection field
with fitting material
with plug-in terminals